Hauler Racks TLRSAA-1 - Manual (Page 3)

HAULER RACKS, INC. Page 3 of 6 Toll Free: 1-800-843-5445
7109 31
st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
WWW.HAULERRACKS.COM
2. Load secure post assembly continued.
Place the fixed load secure post on the crossbar as shown.
Secure by tightening using a 3/8”-16 nut and 3/8” split lock washer
onto the 3/8”-16 x 1-1/2” hex bolt in the center channel of the
crossbar.
Place the adjustable load secure post onto the furthest out 3/8”-16
x 1-1/2” hex bolt in the center channel of the crossbar as shown.
Secure by tightening using a 3/8”-16 nut and 3/8” split lock washer
onto the 3/8”-16 x 1-1/2” hex bolt.
Install end cap on cross bar.
3. Leg placement.
Slide the leg into the “T” bracket as shown.
Join the leg to the “T” bracket by installing (2) 3/8”-16 x 2” carriage
bolts, (2) 3/8” split lock washers and (2) 3/8”-16 nuts. Leave the bolts
loose.
4. HD brace placement.
Place the HD brace on the 3/8”-16 x 1-1/2” bolt in the cross bar.
Loosely secure with a 3/8”-16 nut and a 3/8” split lock washer.
Slide the HD brace towards the leg. Insert the 3/8”-16 x 2” hex head
bolt through the leg and HD brace.
Secure with a 3/8”-16 nut and a 3/8” split lock washer.
Tightening the 3/8”-16 x 2” hex head bolt first and then the nut on
3/8”-16 x 1-1/2” hex head bolt in the crossbar.
Tighten the (2) 3/8”-16 x 2” carriage bolt nuts on the “T” bracket.