Gentec-EO P-LINK - Manual (Page 7)

P- LINK User’s Manual Revision 15.0 7
Gentec Electro – Optics, Inc. All rights reserved
2 Specifications
The following specifications are based on a one-year calibration cycle, an operating temperature of 18 to
28ºC (64 to 82ºF) and a relative humidity not exceeding 80%.
Table 2-1 List of Specifications
Power meter specifications
Power Range 1nW to 10kW
Physical Scale 2V, 15mV
Virtual Power Scales
(photo diode head)
3nW, 10nW, 30nW, 100nW, 300nW, 1µW, 3µW, 10µW, 30µW, 100µW,
300µW, 1mW, 3mW, 10mW, 30mW, 100mW, 300mW, 1W, 3W
Virtual Power Scales
(thermal head)
300 µW, 1 mW, 3 mW, 10 mW, 30mW, 100mW, 300mW, 1W, 3W,
10W, 30W, 100W, 300W, 1kW, 3kW, 10kW
Resolution (digital) Physical scale/8388608
Monitor Accuracy ± 0.5%

5µV
Response Time
(accelerated)
1
1 sec
Sampling Frequency 10Hz
Statistics Current value, Max, Min, Average, Std Dev., RMS stability, PTP
stability, Time
Energy meter specifications (energy mode)
Energy Range 3mJ to 20kJ
Virtual Energy Scales 3mJ, 10mJ, 30mJ, 100mJ, 300mJ, 1J, 3J, 10J, 30J, 100J, 300J, 1kJ,
3kJ, 10kJ, 30kJ
Resolution (digital) 2nV
Accuracy
2
1.0%
Default Trigger Level 250mJ
Software Trigger Level User defined in Joules
Repetition Frequency Support all energy mode power heads
Statistics Current value, Max, Min, Average, Std Dev., RMS stability, PTP
stability, Repetition Rate, Avg Power
General Specifications
Display Rate 3Hz numeric display
10 Hz graphic displays
1
Varies with detector head.
2
Including linearity.