Fig. 5-3 pc-link histogram settings, Fig. 5-4 pc-link tuning needle (two options) – Gentec-EO P-LINK User Manual

Page 15

Text mode
Original mode

P-

LINK User’s Manual Revision 15.0

Gentec Electro

Right-

click on the histogram to set the time period to view(Set X Axis…), reset the display or

select a scale. Note that the Auto-Scale on the histogram starts from the lowest scale and only
does scale-ups. This is made to select the best scale for the user without frequent scale
oscillations.

Fig. 5-3 PC-LINK Histogram Settings

5.1.2 Display - Tuning Needle

Fig. 5-4 PC-LINK Tuning Needle (two options)

Right-click on the Tuning Needle to select a scale. The autoscale(default) mode is useful when
the measurement variations are small, because it will zoom on the best possible scale, but will
oscillate with large variations. Use a fixed scale in this case.