Gentec-EO P-LINK - Manual (Page 14)

P- LINK User’s Manual Revision 15.0 14
Gentec Electro – Optics, Inc. All rights reserved
5 Description of the PC-LINK menus
This section describes in detail the first group of menus essential to the PC-LINK operation. The menus
differ depending on the type of head that is plugged in. The display menu lets you view the status and
your measurement in various ways. Use the settings menu during setup to set the best parameters for the
measurement task at hand. It provides the flexibility to accommodate a wide variety of measurement
conditions. The more active controls you are likely to use during your measurements are in the CTRL
menu. They are described in Section 5.3.
5.1 Display menu
Fig. 5-1 PC-LINK Display menu
5.1.1 Display - Histogram
Fig. 5-2 PC-LINK Histogram