Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh User Manual

Page 6

Table of Contents

Asking for assistance i

Technical support hours i

Tell us what you think i

Introducing the
Asanté MacCon Cards 1-1

Summary of MacCon Card Features 1-2

The Math Co-processor Option 1-2

Asanté EtherTalk Installer Software 1-2

Installing Asanté MacCon Cards 2-1

Preparing for the Installation 2-1

Checking the Requirements 2-1
Observing the Safety Rules 2-2

The MacCon NuBus Card 2-3

Installing the MacCon NuBus Card 2-4

Installing the MacCon 610 Card 2-6
Installing a MacCon LC Card 2-9

Installing a MacCon LC Card in a Color Classic 2-10

Installing the MacCon3 IIsi and MacCon 30i Cards 2-13

Setting the Cable Type on the Daughter Card 2-13
Video Options 2-14
Setting the Slot Address for Two Cards 2-14
Installing the Math Co-processor 2-15
Installing in a Macintosh IIsi 2-16
Installing a MacCon3 IIsi and a Radius Pivot IIsi 2-18
Installing a MacCon Card in a Macintosh SE/30 2-19

Installing a MacCon+ SE Card in a Macintosh SE 2-21

Setting the Cable Type on the Daughter Card 2-21

Connecting the Macintosh to the Network 2-24

With 10BaseT cabling 2-24

Installing the EtherTalk Software 2-25

Two Types of Software Installations 2-25
About EtherTalk Phase 1 and Phase 2 2-26
Installation Procedures 2-26

Accessing Network Services 2-28

Asanté SNMP MacAgent 3-1

Introduction 3-1

TCP/IP Protocol Stack 3-1
IP Addressing 3-1
Requirements 3-2
AsantéView In-Band Network Management Software 3-2