Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh - Manual (Page 46)

Asanté SNMP MacAgent 3-7
∆
Note: The defaults for Read-community and Write-commu-
nity should be used unless you are told otherwise by your
network administrator.
Trap-community
Enter public. (Trap is the SNMP term for alarm or alert.) Public is
usually the default for the SNMP configuration. However, if there is
any question, please contact your network administrator. SNMP
MacAgent sends traps to the Asanté network management station for
two events: restarting your Macintosh and authentication violation.
Trap IP Address
The IP address to which the workstation sends traps. This is usually
the Asanté management station IP address.
Authentication Trap (On/Off)
This is ON by default. This station sends a trap to the Asanté manage-
ment station if accessed by an SNMP management console with the
wrong read or write community string.
SNMP Agent (On/Off)
This is also ON by default. If SNMP Agent is OFF, the agent does not
send information to the Asanté management station.
AsantéView Network Management Station
The Asanté network management station should be running Asanté-
View or a Generic SNMP Management Console. Figure 3-4 shows a net-
work map generated by AsantéView network management software.
Figure 3-4 AsantéView sample network map
MacConi ch 3 SNMP Agent Page 7 Friday, August 23, 1996 10:11 AM