Fairbanks 12-1492 - 12-1496 A.A.R. Combination Railroad Track/MTS - Manual (Page 40)

04/12 40 50538 Rev. 7
5/8-11 Tapped Hole
for Leveling Screw
TOP VIEW
5/8-11 Tapped Hole
for Leveling Screw
TOP VIEW
1 3/8" Hole
1 5/8" Hole
1 3/8" Hole
1 5/8" Hole
50538-26
LEVEL
CHECKROD
50538-27
2: Install the check rod into position, and place the rest of the hardware onto both ends, leav-
ing the hardware loose.
All check rods must be level within 1/100" per foot when weighbridge is at correct elevation.
Raise or lower the Pier Checking stand with its leveling screws until this is achieved.