Fairbanks 12-1492 - 12-1496 A.A.R. Combination Railroad Track/MTS - Manual (Page 24)

04/12 24 50538 Rev. 7
2-K: Weighbridge Hardware
1
5
2
3 4
1
4
Loadcell Top
Bearing Plate
Weighbridge
Check Bracket
50538-7B
1: Part # 54532; 3/4-10 X 3" Hex Bolt. Qty 32 required to connect the load Cell Top Bearing
Plate Assy's to Main Beam bottom flange. Their final Torque value is 150 foot pounds.
Note: The Load Cell Top Bearing Plate Assy mounting holes are tapped 3/4-10.
2: Part # 54229; 3/4-10 X 3 1/2" Hex Bolt A325 with Nut. Qty 16 required to connect the
mid section connecting plates to the bottom of the Main Beams. These bolts are installed to
the connecting plates end, outside holes only. Their final Torque value is 250 foot pounds.
3: Part # 54199; 3/4-10 X 2 1/4" Hex Bolt with Nut. Qty 36 required to connect the lower
cross members to the Main Beams. Their final Torque value is 250 foot pounds.
4: Part # 54217; 3/4-10 X 3" Hex Bolt A325 with Nut. Total Qty 232 required. Their final
Torque value is 250 foot pounds.
Qty 168 required to connect Crossmembers and Outriggers to the Main Beams.
Qty 64 required to connect the Web Splice Plates to the Main Beams at the Mid Sections.
5: Part # 54402; 1" X 3 1/2" Hex Bolt A325 with Nut. Qty 32 required to connect the Check
Brackets to the bottom of the Main Beams. Their final Torque value is 640 foot pounds.
Not Pictured:
Part # Description Qty Used On:
54342 1 1/2-6 Hex Nut 64 Check Rods
58617 1 ½ Spherical Washer Set 32 Check Rods
55766 3/4" X 1 1/4" Bar, J Box 5 Junction Boxes