Fairbanks FB3000 II Operators Manual - Manual (Page 63)

Appendix VII: SOCKS Information
02/10 63 51220 Rev. 1
APPENDIX VII: SOCKS INFORMATION, CONTINUED
The subsequent authentication is method-dependent and described in RFC 1929.
The client’s authentication request is:
• Field 1: Version number, 1 byte (must be 0x01).
• Field 2: Username length, 1 byte.
• Field 3: Username.
• Field 4: Password length, 1 byte.
• Field 5: Password.
Server response for authentication:
• Field 1: Version, 1 byte.
• Field 2: Status code, 1 byte.
─ 0x00 = success.
─ Any other value = failure, connection must be closed.
The client’s connection request is:
• Field 1: SOCKS version number, 1 byte (must be 0x05 for this version).
• Field 2: Command code, 1 byte:
─ 0x01 = establish a TCP/IP stream connection.
─ 0x02 = establish a TCP/IP port binding.
─ 0x03 = associate a UDP port.
• Field 3: Reserved, must be 0x00.
• Field 4: Address type, 1 byte:
─ 0x01 = Ipv4 address.
─ 0x03 = Domain name.
─ 0x04 = Ipv6 address.
• Field 5: Destination address of:
─ 4 bytes for Ipv4 address.
─ 1 byte of name length followed by the name for Domain name.
─ 16 bytes for Ipv6 address.
• Field 6: Port number in a network byte order, 2 bytes.