Fairbanks FB3000 II Operators Manual - Manual (Page 15)

Section 3: Key Functions and Menus
02/10 15 51220 Rev. 1
3.1. KEY FUNCTIONS, CONTINUED
The Kernel can be set up to operate in one of two Modes of Operation, depending
upon the service programming:
─
Gross Weighing
─
GTN (Gross / Tare / Net)
Additional Windows Tips
• ALT + F4 key Shuts down the active program immediately
• Windows Key + D Moves to the Desktop
• Windows Key + E Opens MS Windows Explorer
™
On-Screen
Keyboard External
Keyboard Description
Units Scroll Lock Changes the units of weight displayed, depending on the selection
made in the Calibration Menu.
0 to 9 0 to 9 Used to enter numeric data, such as tares and IDs.
Enter Enter Stores selections into memory during data entry or programming.
F1 F1 Toggles between the scales that are viewed and operated.
F2 F2 Unassigned
F3 F3 Unassigned
F4 F4 Unassigned
F5 F5 Toggles between the scale groups when more than four (4) scales are
used.
F6 F6 Toggles between the Operational Screen and the Multi-Scale
Screen, if more than one scale is being controlled.
F7 Unassigned
F8 Unassigned
F9 Unassigned
F10 •
Service Usage only. !!Warning!! changing this items in this area
can effect the proper operation of the scale.
F11 Unassigned
F12 Unassigned