Fairbanks FB3000 II Operators Manual - Manual (Page 22)

Section 4: Input/Output (I/O)
02/10 22 51220 Rev. 1
4.2.7. Steps in Customizing, Continued
17. Open the Build tab.
18. Left-click on the appropriate field to be
generated within the specific data
string, then select
Text.
─ This adds a new Text box to the
Output Data String.
19. Program a command within the Data
String, either enter an ASCII
Character , or input text .
─ When inputting ASCII Characters,
always
precede the message with
“ 0x... ” and the equivalent ASCII
code up to 3 digits (i.e. 0x099).
20. Open the Port Settings tab.
21. Program the Baud Rate, Stop Bits ,
and the Parity to the appropriate
settings.