Fairbanks FB3000 II Operators Manual - Manual (Page 18)

02/10 18 51220 Rev. 1
Section 4: Input / Output (I/O)
4.1. INTRODUCTION
Connectivity is one of the primary features of the FB3000 II and Kernel Weight
Server program. The FB3000 II has multiple RS232 ports, USB ports, Ethernet
port, and a Parallel port to name a few. This section will provide steps in order to
connect the FB3000 II in a variety of manners to a variety of devices.
4.2. 4.2. CONFIGURE OUTPUT
4.2.1. Introduction
This menu selection provides a means to configure data strings protocols,
configuration parameters, and output modes such as Continuous, Demand,
Auto, To File, and Network.
4.2.2. Configuring an Output Data String
In order to interface an FB3000 II Instrument to software or a pre-existing
peripheral device, such as a remote display, knowing their specific Output
Data String is mandatory.
─ This allows the software or peripheral device to communicate with the
FB3000 II.
─ When adding to other manufacturer’s devices, refer to their Service
Manuals for Output Data String information.
─ Interfacing with other manufacturer’s software, refer to either a web site,
Service Manual, or contact the manufacturer directly for the Output Data
String information.
Fairbanks’ current programming for setting up an Output Data String
provides quick and easy flexibility for customizing the FB3000 II Serial
Outputs.
4.2.3. Two Methods of Formatting
There are two methods to format an Output Data String.
1. Use one of the five (5) preconfigured Load Defaults under the Load
tab.
2. Use the most similar Load Default as a basis for customizing an
Output Data String which matches the manufacturer’s company-specific
configuration. This method is done in the Build tab.