Fairbanks FB3000 II Operators Manual - Manual (Page 10)

Section 1: General Information
02/10 10 51220 Rev. 1
1.2. TECHNICAL SPECIFICATIONS, CONTINUED
ACCESSORIES
CONTINUED
•
External Serial Port Relay Kit ( 26727 )
─ Basic traffic light control (Interact)
•
4-20mA analog and 20mA serial output ( 27104 )
─ PC140 Weight Controller
POWER
REQUIREMENTS
100 - 130 VAC @ 12A @ 60 Hz +/- 2 Hz
─ Separate and dedicated circuit.
─ Neutral to Ground voltage should be < 0.2 vAC
ETL LISTED
•
Conforms to UL STD 60950-1.
•
CAN/CSA C 22.2 NO.60950-1-03.
APPROVALS
•
CC# 04-013;
•
MC# M-5552C
1.3. FEATURES
DIAGNOSTICS
Built-in self diagnostics reports on:
• Calibration change
• Time and date change
• Remote access enabled
• Routine maintenance required’
• Flash memory error
• Load cell ghosted
• Load cell failure
LOAD CELL FLAG
Visual “flags” identify problem load cell(s) on diagnostic screen until flag is
manually cleared to identify intermittent problems
LOAD CELL
GHOSTING
Ability to electronically “mimic” or duplicate a failed load cell if equipped
with Intalogix
™ Interface for load cell communications (preventing system
failure and/or shutdown)
REMOTE
DIAGNOSTICS
Programmable Remote Diagnostic Utility provides remote diagnostics and
configuration from any PC with proper authorization and access