Fairbanks Aegis Transport Scale - Manual (Page 19)

Section 3: Service & Maintenance
04/10 19 51191 Rev. 2
3.2.2. Pillar Replacement Steps
1. Unplug/remove the cable to the Indicator
(or Battery Pack Unit) from the Scale
Platform connection.
2. If it is present, remove the fastening
screws on the battery pack, pulling it
away and setting it aside.
3. Remove all the fastening bolts on the
Indicator Stand, pulling the Indicator
away and setting it aside.
4. At the Wheel-base side of the Platform, remove the
four (4) Fastening Bolts of the Cover using the
seven-sixteenths inch ( 7/16”) Open-ended
Wrench .
5. Once opened, check the Interface Cable from the
Platform to the Indicator for visible breaks or cracks.
6. Replace the cable, if needed.