Fairbanks Aegis Transport Scale - Manual (Page 10)

Section 1: General Information
04/10 10 51191 Rev. 2
  IMPORTANT INSTALLATION NOTICE  
 All Transport Scale Interface Cables used shall be located a
minimum of thirty-six (36”) inches distance away from all single
and multiple phase high energy circuits and electric current
carrying conductors.
• Also included is the scale components themselves, such
as 120 volt AC, 240 volt AC, 480 volt AC and electric
supply of higher voltage wiring runs and stations, AC
power transformers, overhead or buried cables, electric
distribution panels, electric motors, florescent and high
intensity lighting which utilize ballast assemblies, electric
heating equipment, traffic light wiring and power, and
relay boxes.
• This includes all scale components, including digital
weight indicators and peripheral devices that are not
designed to operate on internal combustion engine driven
electric generators and other similar equipment.
 Electric arc welding can severely damage scale
components such as digital weight indicators, junction boxes,
balance boards, sectional controllers, power supplies, and load
cells.
 For additional information, contact your Fairbanks Scales Representative .