Teledyne 6650 - Fluorescence Probe - Oil in Water analysis system - Manual (Page 6)

Model 6650
vi Teledyne Analytical Instruments
Setup & Operation....................................................................... 12
5.1 First Power-Up Following Installation 13
5.2 Application Engineering 14
5.3 Initialization for Process Monitoring: Mode 2 Operation 15
5.3.1 Case 1: Process monitoring following hardware
setup without application engineer 15
5.3.2 Case 2: Process monitoring without application
engineering 15
5.3.3 Case 3: Process monitoring following application
engineering 16
5.4 Initialization for Process Monitoring: Mode 1 Operation 18
5.5 Adjusting the Display 19
5.6 Adjusting the 20 mA Level 20
5.7 Adjusting the 20 mA Level 21
5.8 Diagnostics 22
5.8.1 Front Panel Lamp Diagnostics 22
5.8.2 Rectifying the Problem: Flashing Yellow Indicators 23
5.8.3 Rectifying the Problem: Red Indicators 24
Specifications.............................................................................. 26
6.1 General Measurement Specifications 26
6.2 Transmitter Specifications 27
6.3 Mechanical Specifications of Analysis Cell/Probe. 28
Appendix...................................................................................... 30
A-1 Application Engineering Assistance 30
A-1.1 Series 1 - Initializing the Unit and Determination of
the Probe/Analyzer Signal Level 30
A-1.2 Determination of the Probe/Transmitter
Fluorescence in a Non-Fluorescing Liquid: 32
A-1.3 Determination of the Process Fluorescence: 33
A-2 Notes 36
A-3 Recommended 2-Year Spare Parts List 37
Index............................................................................................. 38