Teledyne 4040 - Methane / Nonmethane analyzer - Manual (Page 10)

Series 4040
x Teledyne Analytical Instruments
3.3.3.1 Primary Input Power 29
3.3.3.2 Fuse Installation 29
3.3.3.3 50-Pin Equipment Interface Connector 29
3.3.3.4 Analog Output 29
3.3.3.5 Alarm Relays 30
3.3.3.6 Digital Remote Cal Inputs 32
3.3.3.7 Range ID Relays 33
3.3.3.8 Network I/O 33
3.3.3.9 Pin Out Table 33
3.3.4 RS-232 Port 35
3.3.5 Supporting Gases 35
3.3.5.2 Effluent 37
3.3.5.3 Sample Bypass Vent 37
3.3.5.4 Fuel and Air Connections 37
3.4 Placing the System in Operation 37
3.5 Activating the Support Gases 38
3.5.1 Air 38
3.5.2 Carrier Gas 38
3.5.3 Span Gas 38
3.5.4 Fuel 38
3.6 Flame Ignition 39
3.6.1 Verification of the Flame Guard Circuit 39
3.6.2 Ignition and/or Flame Guard Circuit Failure 40
3.6.3 Sample Pump 40
Operation ..................................................................................... 43
4.1 Analyzer Operation 43
4.2 Default Parameters 44
4.3 Style Conventions 44
4.4 Navigation and Data Entry 45
4.4.1 Arrow Keys 45
4.4.2 ENTER 45
4.4.3 ESCAPE 46
4.5 Menu Structure 47
4.5.1 Main Menus 48