Teledyne 3010TA - Split architecture trace oxygen analyzer - Manual (Page 7)

vii
Oxygen Analyzer Oxygen Analyzer Oxygen Analyzer Oxygen Analyzer Oxygen Analyzer
• Stainless steel cell block is standard equipment.
• Advance design Micro-Fuel Cell sensor, Specially designed
model for trace analysis, has a one year warranty and an
expected lifetime of two years.
• Versatile analysis over a wide range of applications.
• Microprocessor based electronics: 8-bit CMOS microprocessor
with 32 kB RAM and 128 kB ROM.
• Three user definable output ranges allow best match to users
process and equipment: 0-10 ppm through 0-250,000 ppm for
trace analysis.
• Air-calibration range for convenient spanning at 20.9 %.
• Auto Ranging allows analyzer to automatically select the proper
preset range for a given measurement. Manual override allows
the user to lock onto a specific range of interest.
• Two adjustable concentration alarms and a system failure alarm.
• Self-diagnostic testing, at startup and on demand, with continuous
power-supply monitoring.
• Two way RFI protection.
• RS-232 serial digital port for use with a computer or other
digital communications device.
• Analog outputs for Concentration and Analysis Range: 0–1 V dc
standard. Isolated 4–20 mA dc standard.
• Compact and versatile design: flush-panel, rack-mountable, or
bulkhead mounted Control Units available.