Teledyne 3010TB - Split architecture trace oxygen analyzer - Manual (Page 7)

vii
Trace Oxygen Analyzer
Teledyne Analytical Instruments
Main Features of the Analyzer
The Model 3010TB series Oxygen Analyzers are sophisticated yet
simple to use. The main features of these analyzers include:
• A 2-line alphanumeric display screen, driven by microprocessor
electronics, that continuously prompts and informs the operator.
• High resolution, accurate readings of oxygen content: from low
ppm levels through 25%. Large, bright, meter readout.
• Stainless steel cell block is standard equipment.
• Advance design Micro-Fuel Cell sensor, Specially designed
model for trace analysis, has a one year warranty and an
expected lifetime of two years.
• Versatile analysis over a wide range of applications.
• Microprocessor based electronics: 8-bit CMOS microprocessor
with 32 kB RAM and 128 kB ROM.
• Three user definable output ranges allow best match to users
process and equipment: 0-10 ppm through 0-250,000 ppm for
trace analysis.
• Air-calibration range for convenient spanning at 20.9 %.
• Auto Ranging allows analyzer to automatically select the proper
preset range for a given measurement. Manual override allows
the user to lock onto a specific range of interest.
• Two adjustable concentration alarms and a system failure alarm.
• Self-diagnostic testing, at startup and on demand, with
continuous power-supply monitoring.
• Two way RFI protection.
• RS-232 serial digital port for use with a computer or other
digital communications device.
• Analog outputs for Concentration and Analysis Range: 0–1
V dc standard. Isolated 4–20 mA dc standard.
• Compact and versatile design: flush-panel, rack-mountable, or
bulkhead mounted Control Units available.