Teledyne 3010TB - Split architecture trace oxygen analyzer - Manual (Page 60)

1-2: Part II
1 Introduction Model 3010T
Teledyne Analytical Instruments
Figure 1-1: Cutaway View of 3010T Analysis Unit
CAUTION: Depending on the user’s process, the EXHAUST
gas may contain toxic components. In such cases,
the exhaust MUST vent to a suitably contained
area.
1.3 Electrical Connector Panel
Figure 1-2 shows the internal Electrical Connector Panel. Cables enter
the housing through access ports (visible in Figure 1-1), and connect to
terminals inside the housing. The connectors and controls are described
briefly here. They are described in detail in the Installation, Operation, and
Maintenance chapters, as appropriate.