Teledyne 3010TB - Split architecture trace oxygen analyzer User Manual
Page 6
vi
Model 3010TB
Teledyne Analytical Instruments
Model and Part Number Designations
The part numbers are the most specific identification. When using this
manual for operation, maintenance, or ordering parts, check the part num-
bers on your Instruments to be sure of a match. Where an underscore (_)
appears in a model number, the unit has more than one application. For
example, 3010T_C means that the same unit is part of the 3010TAC and
the 3010TBC series and consists of two sections; Control Unit and Remote
Analysis or Sensor Probe.
3010TA:
NEC Type Trace Oxygen Analyzer with flush mount
Control Unit, PN D-64596A and a 3010T Explosion Proof
Analysis Unit, PN D-65478.
3010PA:
NEC Type Percent Oxygen Analyzer with flush mount
Control Unit, PN D-64596B or C and 3010P Explosion
Proof Analysis Unit, PN D-65479.
3010TB:
NEC type Trace Oxygen Analyzer with bulkhead mount
Control Unit, PN D-66190A, and a 3010T Explosion Proof
Analysis Unit, PN D-65478.
3010PB:
NEC type Percent Oxygen Analyzer with bulkhead mount
Control Unit, PN D-66190 B or C, and a 3010T Explosion
Proof Analysis Unit, PN D-65479.
3010TAC:
CENELEC type Trace Oxygen Analyzer with flush mount
Control Unit, PN D-66192A, and a 3010T_C Remote
Sensor, PN D-66193.
3010PAC:
CENELEC type Percent Oxygen Analyzer with flush mount
Control Unit, PN D-66192 B or C, and a 3010P_C Remote
Sensor, PN D-66191.
3010TBC:
CENELEC type Trace Oxygen Analyzer with bulkhead
mount Control Unit, PN D-66194A, and a 3010T_C Remote
Sensor, PN D-66193.
3010PBC:
CENELEC type Percent Oxygen Analyzer with bulkhead
mount Control Unit, PN D-66194 Bor C, and a 3010P_C
Remote Sensor, PN D-66191.
Options:
See Specific Model Information sheet, on page iv for details.