Teledyne 3010MB - Split architecture paramagnetic oxygen analyzer - Manual (Page 20)

3 Installation Model 3010MB
3-2: Part I
Teledyne Analytical Instruments
Figure 3-1: Front Panel of the Model 3010MB Control Unit
All operator controls are mounted on the inner control panel, which is
hinged on the left edge and doubles as a door to provide access to the inter-
nal components of the instrument. The door will swing open when the
button of the latch is pressed all the way in with a narrow gauge tool (less
than 0.18 inch wide), such as a small hex wrench or screwdriver Allow
0.0 %
AL-1
NPT Fitting
supplied by
customer
3/4" NPT
3/4" NPT
1" NPT
1" NPT
AC POWER IN
50/60 HZ
100-240V
ALARM OUTPUTS
DIGITAL INPUT SPAN ZERO
CAL. CONTACT RANGE
ID CONTACTS RS-232
SOLENOID RETUR
ANALOG OUTPUTS
REMOTE SENSOR
NET WORK