Teledyne 3000ZA-3X - Trace oxygen analyzer - Manual (Page 26)

Installation 3000ZA-3X
Teledyne Analytical Instruments 14
Figure 3-1: Front Panel of the Model 3000TA (Model 3000ZA similar)
All operator controls, except the flow control needle valve, are
mounted on the control panel, which is hinged on the left edge and
doubles as the door that provides access to the sensor and cell block
inside the instrument. The door latch is spring loaded and will swing
open when the button in the center of the latch (upper right corner) is
pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide). Allow clearance for the door to open in a 90-degree arc of radius
7.125 inches. See Figure 3-2.
Figure 3-2: Required Front Door Clearance