Teledyne 3000TA - General purpose trace oxygen analyzer - Manual (Page 63)

A-1
Trace Oxygen Analyzer Appendix
Teledyne Analytical Instruments
Appendix
A-1 Specifications
Packaging: General Purpose
• Flush panel mount (Standard).
• Relay rack mount. Contains either one or
two instruments in one 19" relay rack
mountable plate (Optional).
Sensor: Teledyne L-2 trace analysis Micro-Fuel Cell.
Cell Block: 316 stainless steel.
Sample System: All wetted parts of 316 stailess steel.
90 % Response Time: 65 seconds at 25 °C (77 °F).
Ranges: Three user definable ranges from 0–10 ppm to
0–250,000 ppm, plus air calibration range of 0-
250,000 ppm (25 %).
Autoranging with range ID output.
Alarms: One system-failure alarm contact to detect
power failure or sensor-zero failure.
Two adjustable concentration threshold alarm
contacts with fully programmable setpoints.
Displays: 2-line by 20-character, VFD screen, and one 5
digit LED display.
Digital Interface: Full duplex RS-232 communications port.
Power: Universal power supply 85-250 V ac, at
47-63 Hz.
Operating Temperature: 0-50 °C (32-122 °F)