Teledyne 3000TA - General purpose trace oxygen analyzer - Manual (Page 35)

Trace Oxygen Analyzer Operation 4
4-3 Teledyne Analytical Instruments
4.3 The System Function
The subfuctions of the System function are described below. Specific
procedures for their use follow the descriptions:
• Auto-Cal: Used to define an automatic calibration sequence
and/or start an Auto-Cal.
• PSWD: Security can be established by choosing a 5 digit
password (PSWD) from the standard ASCII character set. (See
Installing or Changing a Password, below, for a table of ASCII
characters available.) Once a unique password is assigned and
activated, the operator MUST enter the UNIQUE password to
gain access to set-up functions which alter the instrument's
operation, such as setting the instrument span or zero setting,
adjusting the alarm setpoints, or defining analysis ranges.
Figure 4-1: Hierarchy of Functions and Subfunctions
Set Instrument
Span
Set Instrument
Zero
Set Alarm
Setpoints
Confrigure Mode
of Alarm
Operation
Define Analysis
Ranges
Perform Oxygen
Analysis of
the Sample
ANALYZE
SYSTEM
SPAN
ZERO
ALARMS
RANG E
TRAK/HLD
Perform
Self-Diagnostic
Test
Initiate
Automatic
Calibration
Set Password
Logout
Show Negative