Teledyne 306WA - Analog trace oxygen analyzer - Manual (Page 40)

A-2
Appendix Appendix Appendix Appendix Appendix Model 306W Model 306W Model 306W Model 306W Model 306WA A A A A
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
Spare Parts List Spare Parts List Spare Parts List Spare Parts List Spare Parts List
QTY. PART NO. DESCRIPTION
1 C1372 Cell assembly
NOTE: Specify cell class and range of analyzer when ordering.
2 O5 O-ring, cell terminal
1 O25 O-ring, cell seal
2 O26 O-ring, calibrator
2 O9 O-ring, humidifier column
2 O8 O-ring, reservoir cap
2 O204 O-ring, flowmeter
1 A4616 Calibrator assembly
1 A33748 Thermistor assembly
1 A3042 Humidifier column assembly
1 R2454 Humidifier column heater (110V)
1* R2453 Humidifier column heater (220V)
1 A5267 Reservoir cap
5 F10 Fuse, 3AG-2A
5 F6 Fuse, 3AG-1/4A, Slo-Blo
2 H2 Heater (306WA)
2 H68 Heater (307WA, 308WA)
1 B6274 Flowmeter ass’y (specify background gas)
1 C14449 PC Board, Proportional temp. control
(For applications less than 10 PPM)
1* C41274 PC Board, Proportional temp. control (220V)
1* B29600 PC Board, E/I converter, isolated (O option)
1* B14702 PC Board, E/I converter, neg. gnd. (I option)
1* A9309 PC Board, Alarm comparator, dual (-2 opt.)
1 A44608 Type A Electrolyte
1 A44609 Type C Electrolyte
1 A50510 Cal Kit (Eelectrolyte for calibrator)
1 P31 Rheostat (Humidity Control Resistor) -1.5k, 115V
1 R1212 Rheostat (Humidity Control Resistor) -5.0k, 220V
* optional
A minimum charge is applicable to spare parts orders.
IMPORTANT: Orders for replacement parts should include the model number,
serial number, and range of the analyzer for which the parts are
intended.