Model 306w – Teledyne 306WA - Analog trace oxygen analyzer User Manual

Page 2

TELEDYNE ELECTRONIC TECHNOLOGIES

Analytical Instruments

Model 306W

Model 306WA

ments

transcribed, stored in a retrieval system, or translated into any other language or computer
language in whole or in part, in any form or by any means, whether it be electronic,
mechanical, magnetic, optical, manual, or otherwise, without the prior written consent of
Teledyne Electronic Technologies/Analytical Instruments, 16830 Chestnut Street, City of
Industry, CA 91749-1580.

Warranty

This equipment is sold subject to the mutual agreement that it is warranted by us

free from defects of material and of construction, and that our liability shall be limited to
replacing or repairing at our factory (without charge, except for transportation), or at
customer plant at our option, any material or construction in which defects become
apparent within one year from the date of sale, except in cases where quotations or
acknowledgements provide for a shorter period. Components manufactured by others bear
the warranty of their manufacturer. This warranty does not cover defects caused by wear,
accident, misuse, or neglect. We assume no liability for direct or indirect damages of any
kind and the purchaser by the acceptance of the equipment will assume all liability for
any damage which may result from its use or misuse.

We reserve the right to employ any suitable material in the manufacture of our

apparatus, and to make any alterations in the dimensions, shape or weight of any parts, in

so far as such alterations do not adversely affect our warranty.

Important Notice

This instrument is intended to be used a tool to gather valuable data. The informa-

tion provided by the instrument may assist the user in eliminating potential hazards
caused by the process that the instrument is intended to monitor; however, it is essential

it is essential

that all personnel involved in the use of the instrument or its interface with the process

that all personnel involved in the use of the instrument or its interface with the process
being measured be properly trained in the process itself, as well as all instrumentation

being measured be properly trained in the process itself, as well as all instrumentation

related to it.

The safety of personnel is ultimately the responsibility of those who control process

conditions. While this instrument may be able to provide early warning of imminent
danger, it has no control over process conditions, and can be misused. In particular, any
alarm or control system installed must be tested and understood, both as they operate and
as they can be defeated. Any safeguards required such as locks, labels, or redundancy
must be provided by the user or specifically requested of Teledyne.

The purchaser must be aware of the hazardous conditions inherent in the process(es)

he uses. He is responsible for training his personnel, for providing hazard warning
methods and instrumentation per the appropriate standards, and for ensuring that hazard
warning devices and instrumentation are maintained and operated properly.

Teledyne Electronic Technologies/Analytical Instruments, the manufacturer of this

instrument, cannot accept responsibility for conditions beyond its knowledge and
control. No statement expressed or implied by this document or any information

No statement expressed or implied by this document or any information

disseminated by the manufacturer or his agents is to be construed as a warranty of

disseminated by the manufacturer or his agents is to be construed as a warranty of
adequate safety control under the user's process conditions.

adequate safety control under the user's process conditions.