beautypg.com

Teledyne 306WA - Analog trace oxygen analyzer User Manual

Page 13

background image

T

T

T

T

Trace Oxyg

race Oxyg

race Oxyg

race Oxyg

race Oxygen Anal

en Anal

en Anal

en Anal

en Analyz

yz

yz

yz

yzer

er

er

er

er

Installation 3.0

Installation 3.0

Installation 3.0

Installation 3.0

Installation 3.0

3-1

TELEDYNE ELECTRONIC TECHNOLOGIE

Analytical Instruments

Installation

Installation

Installation

Installation

Installation

3.1 Location

3.1 Location

3.1 Location

3.1 Location

3.1 Location

With proper shielding of the leads, the analyzer and the readout device

can be separated by as much as 1,000 feet. However, they should be placed
as close together as possible. For the most convenient operation, the read-
out recorder or meter should be within view of the controls, particularly
when the unit is being calibrated. Other location considerations:

1) The analyzer should be sheltered from the elements.

2) Ambient temperature must be within 30 to 120 °F.

30 to 120 °F.

30 to 120 °F.

30 to 120 °F.

30 to 120 °F.

3) The unit should not be subject to excessive shock or vibration.

4) It should be as close as possible to the sample point.

5) There must be access to the back and side of the unit for

connection or maintenance of sample lines and power.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE: Since the level of the electrolyte in the measuring cell is critical and

Since the level of the electrolyte in the measuring cell is critical and

Since the level of the electrolyte in the measuring cell is critical and

Since the level of the electrolyte in the measuring cell is critical and

Since the level of the electrolyte in the measuring cell is critical and
the water level control system for the humidifier is gravity sensitive,

the water level control system for the humidifier is gravity sensitive,

the water level control system for the humidifier is gravity sensitive,

the water level control system for the humidifier is gravity sensitive,

the water level control system for the humidifier is gravity sensitive,
THE ANALYZER MUST BE MOUNTED SO THAT THE BOTTOM OF

THE ANALYZER MUST BE MOUNTED SO THAT THE BOTTOM OF

THE ANALYZER MUST BE MOUNTED SO THAT THE BOTTOM OF

THE ANALYZER MUST BE MOUNTED SO THAT THE BOTTOM OF

THE ANALYZER MUST BE MOUNTED SO THAT THE BOTTOM OF
THE CASE IS LEVEL.

THE CASE IS LEVEL.

THE CASE IS LEVEL.

THE CASE IS LEVEL.

THE CASE IS LEVEL.

Figure 3 depicts a typical system layout.

3.2 Electrical Connections

3.2 Electrical Connections

3.2 Electrical Connections

3.2 Electrical Connections

3.2 Electrical Connections

A diagram of the necessary electrical connections is shown in Figure 4.

Note:

Note:

Note:

Note:

Note: See the Interconnection Diagram (drawing A-21916) included in the

See the Interconnection Diagram (drawing A-21916) included in the

See the Interconnection Diagram (drawing A-21916) included in the

See the Interconnection Diagram (drawing A-21916) included in the

See the Interconnection Diagram (drawing A-21916) included in the
back of this manual, as well as any Addenda that may be included

back of this manual, as well as any Addenda that may be included

back of this manual, as well as any Addenda that may be included

back of this manual, as well as any Addenda that may be included

back of this manual, as well as any Addenda that may be included
with this manual for information specific to your instrument.

with this manual for information specific to your instrument.

with this manual for information specific to your instrument.

with this manual for information specific to your instrument.

with this manual for information specific to your instrument.

The connections include a terminal for grounding the analyzer case and

chassis in accordance with accepted industrial practices. The maximum
power requirement is less than 1½ amperes at 115 VAC

1½ amperes at 115 VAC

1½ amperes at 115 VAC

1½ amperes at 115 VAC

1½ amperes at 115 VAC.