Safety messages – Teledyne 2750 - Portable turbine generator gas analzyer User Manual
Page 4

Model
2750
Teledyne
Analytical
Instruments
iv
Safety Messages
Your safety and the safety of others is very important. We have
provided many important safety messages in this manual. Please read
these messages carefully.
A safety message alerts you to potential hazards that could hurt you
or others. Each safety message is associated with a safety alert symbol.
These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
GENERAL
WARNING/CAUTION:
Refer to the instructions for details
on the specific danger. These cautions warn of specific
procedures which if not followed could cause bodily
Injury and/or damage the instrument.
CAUTION
: Hot Surface Warning: This warning is specific to heated
components within the instrument. Failure to heed the
warning could result in serious burns to skin and
underlying tissue.
WARNING:
Electrical Shock Hazard: Dangerous voltages appear within
this instrument. This warning is specific to an electrical
hazard existing at or nearby the component or procedure
under discussion. Failure to heed this warning could
result in injury and/or death from electrocution.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
NOTE:
Additional information and comments regarding a
specific component or procedure are highlighted in the
form of a note.
CAUTION:
THE ANALYZER SHOULD ONLY BE USED FOR THE
PURPOSE AND IN THE MANNER DESCRIBED IN
THIS MANUAL.
No
Symbol