beautypg.com

Selecting a configuration model, Selecting a, Electing a – ADC 400F User Manual

Page 44: Onfiguration, Odel

background image

Selecting a Configuration Model

36

Megabit Modem 400F User Manual

S

ELECTING A

C

ONFIGURATION

M

ODEL

There are many configuration options for the Megabit Modem 400F from which you can select.
The following is a recommended model for configuring the Megabit Modem 400F:

1

Complete the WAN configuration on

page 38

for Bridge/Router RFC 1483.

2

On the EasySession page:

Select the sessions you want active then click Enable. The modem will set up the session
with the service provider. The

Up

radio button next to the session(s) will indicate that the

session was successfully set up.

3

Set up the LAN side configuration, including DHCP on

page 41

for Bridge/Router RFC

1483. The modem will serve IP addresses to devices on the LAN (routing mode only).

See also other documents in the category ADC Hardware: