Setting up the pc to configure the modem, Setting up the pc to configure, The modem – ADC 400F User Manual
Page 26: Pc t, Etting, P the, Onfigure the, Odem
Setting Up the PC To Configure the Modem
18
Megabit Modem 400F User Manual
S
ETTING
U
P THE
PC T
O
C
ONFIGURE THE
M
ODEM
Configure the Megabit Modem 400F using a PC connected to the 10/100BASE-T port. The PC
must be set to
Specify an IP address
to initially access the modem. Enter an IP address for PC NIC
card that is on the same subnet as the IP address for the modem. If you want to view or change
the default IP address for the modem, see
“Using the RS-232 Management Port” on page 57
.
The following is an example of how to set up the PC using Microsoft Windows
®
95. If you
use an operating system other than Windows 95, refer to the appropriate operating system user
documentation.
1
Open the
Control Panel
window and double-click on the
Network
icon
shown at right.
2
In the
Network
dialog (shown below), double-click
TCP/IP
under the
Configuration
tab (or highlight
TCP/IP
then click
Properties
).
3
In the
IP Address
tab, select
Specify an IP address.
4
Enter an IP address and subnet mask for the PC, then click
OK
.
5
Restart the PC.