Aiwa XR-M131 - Manual (Page 13)

13
En
6 Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7 Press MODE on the remote control to switch to
side B and select the tracks for the side.
8 Press MODE on the remote control to switch back
to side A and press w to start recording on side
A.
The tape is rewound to the beginning of side A and
recording starts.
When recording on side A finishes, "SIDE CHA" appears
on the display. Proceed to step 9.
9 Press MODE on the remote control to switch to
side B, turn over the tape, and press w to start
recording on side B.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press MODE on the remote control to
select side A or B.
2 Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press MODE on the remote control to select side A or B, and
press s to clear the program for the selected side. Then,
select tracks again.
To clear the edit program
Press s twice.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
Side A
Tab for side A