Fig. 0731 series flush lock set, Exploded view, Determining the hand of the lock set – PERKO 0731 User Manual
Page 2

Fig. 0731 Series Flush Lock Set
MOUNTING INSTRUCTIONS
Read all instructions before proceeding.
This series of flush lock sets is designed to be mounted on
doors 1/2 inch to 3/4 inch thick.
1).
Tape template on door at the desired location.
2).
Mark through template for two 5/8” diameter holes (“A”) and two 9/32”
diameter holes (“B”)
3).
Drill all 4 holes.
4).
Notch door out to dimensions shown on template.
CAUTION: For proper fit, do not exceed notch dimensions.
5).
Remove handles and separate the escutcheons (by removing two screws “D”) Slide
lock set assembly into notch in door. Refasten escutcheons with screws “D”.
6).
Use awl and hammer to mark for 3/32” diameter pilots in both holes “C” then align
and fasten lock set housing assembly to door with (2) #6 flat head screws.
(supplied).
7).
Attach 'L' handles to the shaft and install in lock set with square washers.Tighten set
screws on lever handles.
8).
Mount strike plate to door frame with (2) #6 flat head screws (supplied).
Exploded View
Handle
Handle
Set
Screw
Shaft
#6 Screw
(Supplied)
Washer
Washer
Lock Escutcheon
Angled Escutcheon
and Case Assembly
LEFT INWARD
LEFT OUTWARD
RIGHT OUTWARD
RIGHT INWARD
Determining the hand of the lock set.
Catalog No.
Door Size
Type of Lock
0731001LIC
1/2
Left Inward
0731001LOC
1/2
Left Outward
0731001RIC
1/2
Right Inward
0731001ROC
1/2
Right Outward
0731002LIC
5/8
Left Inward
0731002RIC
5/8
Right Inward
0731002LOC
5/8
Left Outward
0731002ROC
5/8
Right Outward
0731003LIC
3/4
Left Inward
0731003LOC
3/4
Left Outward
073-003RIC
3/4
Right Inward
0731003ROC
3/4
Right Outward
Item
Cat. Nos
Handle Assy for 1/2”
071100198A
Handle Assy for 5/8”
071100298A
Handle Assy for 3/4”
071100398A
Case Assembly
071100088B
Angled Escutcheon
for 1/2” Door
071100188C
Angled Escutcheon
for 5/8” Door
071100288C
Angled Escutcheon
for 3/4” Door
071100388C
Lock Escutcheon
073100099A
Privacy Latch Handle
(Includes Shaft)
071100088A
Strike Plate
0912000CHR
NOTE:
The privacy latch handle should always be mounted on the door’s interior side
Face Plate
Screws “D”
(Supplied)
SPARE PARTS
Note: Handle Assembly includes 2 lever
handles, set screws, washers and shaft.
Privacy
Latch
Handle
Strike
Plate
Key