PERKO 0931 - Manual

Cat. No. 0931#1 Series Lock With Flush Cam Bar And Flexible Strike Plate.
Cat. No. 0931#2 Series Lock With Offset Adjustable Cam Bar.
Cat. No. 0931#3 Series Lock With Straight Cam Bar.
Cat. No. 0932#1 Series Latch With Flush Cam Bar And Flexible Strike Plate.
Cat. No. 0932#2 Series Latch With Offset Adjustable Cam Bar.
Cat. No. 0932#3 Series Latch With Straight Cam Bar.
Cat. No. 1089#1 Series Optional Weatherproof Cover - See Back
MOUNTING INSTRUCTIONS
These locks or latches are designed to be mounted through doors from 1/4 inch to 1-1/8 inches thick.
The cam bars are adjustable to a maximum of 3 inches from the mounting surface. (The optional strike plate
is supplied only with style #1).
1 ). Cut out template below. Fold on dotted line. Place on door at desired height with folded tab overlapping
edge.
2). Mark center of hole for drilling.
3). Drill 2 inch hole through door.
4). Insert lock or latch through hole in door with mounting screw holes in a horizontal position and attach
back up ring from inside.
5). Mount strike plate (if desired) on suitable surface.
6). Re-assemble cam bar with proper adjustment. Tighten set screw and locking nut with lock washer.
Note: For continued ease of operation, periodically apply a lock cylinder lubricant.
MOUNTING TEMPLATE
0931#1 Series
0931#2 Series
0931#3 Series
0932#1 Series
0932#2 Series
0932#3 Series
Use 2 Inch Drill
1-3/8 Inch
FOLD O
VER EDGE OF DOOR
PERKO, INC.
8/04 16490 N.W. 13th AVENUE
0931INS1 Miami, FL 33169-5707
www.perko.com
(SEE OVER)