Setting the interval time, Interval data output / print output – A&D Weighing Indicator AD-4405 User Manual
Page 57

AD-4405 Weighing Indicator
Page
55
15.3.1. Setting the Interval Time
Step 1 By pressing the
SETPOINT(3)
key while pressing the
key, intval will
be displayed for 2 seconds.
Step 2 Select which interval time to set using the following keys. The item is displayed.
MODE
key ....... The key to select serial output int 5i or printer int p to set.
ESC
key .......... The key to return to the weight display.
ENTER
key...... The key to proceed to the time setting (Step 3).
Step 3 Set the interval time using the following keys. The key operation is the same as the
time settings.
0
-
9
key.......... The key to set the value at the blinking digit, then the blinking
digit shifts to the right. (Illegal numbers are ignored) .
+/-
key ............. The key to shift the blinking digit to the right.
CLEAR
key ...... The key to reset the settings and display the interval time stored
in memory.
ESC
key .......... The key to return to Step 2 without changing the interval time
settings.
ENTER
key...... The key to store the interval time then return to Step 2.
15.3.2. Interval Data Output / Print output
Set the data output mode or print mode to “Manual mode” respectively to interval
data output or print out.
By pressing the
START(7)
key while pressing the
key the interval timer
starts and the first data is output or printed.
At the start, the internal printer prints the interval time setting first.
By pressing the
STOP (8)
key while pressing the
key the interval timer
stops and the data at that time is output or printed. The internal printer prints “Intv.
Stop” before printing the data.
The internal printer prints unstable data in the interval print mode.
The internal printer replaces over-range data with spaces and decimal point.
15. Common Printer and Data Output