A&D Weighing Indicator AD-4405 - Manual (Page 31)

AD-4405 Weighing Indicator Page 29
Serial Interface
Item
Parameter
Description
** 0 Stream mode, command is not acceptable
1 Manual mode, command is effective
2 Auto print mode(+), command is effective
3 Auto print mode(+/-), command is effective
4 When accumulation, automatically output
f40
Output mode
5 Command mode (output by command only)
0 No output
** 1 Manual, Fixed format
2 Auto, Fixed format
3 Manual, Format 1 (f34)
4 Auto, Format 1 (f34)
5 Manual, Format 2 (f35)
f41
Accumulated data
output at
accumulated data
display
6 Auto, Format 2 (f35)
** 0 No delay
1 0.5 second
2 1.0 second
3 1.5 seconds
f42
Delay for continual data
4 2.0 seconds
** 0 Not used f43
Command address
1 Use (Address determined f06)
** 0 Approx. 1 second f44
Time out
1 No limitation
** 0 CR, LF (0Dh, 0Ah) f45
Terminator
1 CR (0Dh)
S. I/F and Internal Printer Current Loop output
D.P. Delimitter D.P. Delimitter
* 0 Dot (.) Comma (,) Dot (.) Comma (,)
1 Comma (,) Semicolon (;) Dot (.) Comma (,)
2 Dot (.) Comma (,) Comma (,) Semicolon (;)
f46
D.P. / DelimitterSerial
Interface, Internal
Printer and Current
Loop output
3 Comma (,) Semicolon (;) Comma (,) Semicolon (;)
0 600 bps
1 1200 bps
** 2 2400 bps
3 4800 bps
f47
Baud rate
4 9600 bps
** 0 Data 7bits, Even parity
1 Data 7bits, Odd parity
f48
Data bit, parity
2 Data 8bits, Non parity
*: Initial settings. bps: bit per second.
6.2. F-Functions