A&D Weighing Indicator AD-4405 - Manual (Page 28)

Page 26 AD-4405 Weighing Indicator
Comparator
Item
Parameter
Description
* 0 Not used
1 Upper/lower limit comparison (2 Limits setting)
2 Upper/lower limit comparison (Target and allowance)
3 Upper/lower limit comparison (Target and % allowance)
4 HH/Hi/OK/Lo/LL comparison (4 Limits setting)
5 HH/Hi/OK/Lo/LL comparison (Target and allowance)
6 HH/Hi/OK/Lo/LL comparison (Target and % allowance)
7 Check weighing 1
8 Check weighing 2
9 Check weighing 3
10 Simple batch 1
11 Simple batch 2
f22
Comparator function
12 Simple batch 3 (Loss in weight)
10 11 Includes zero band(1)
20 21 Includes minus(1)
30 31 Stable(0) /All of the time(1) f23 (f22 1 to 6)
[Type2]
Validation of
comparison
40 41 All of the time(0)/Start, stop(1)
Initial settings are
11,21,31 and 40.
10 11 Tare when start(1)
20 21 Stop after Full by key(0)/Auto(1)
30 31
Over/Under judgment:
After dribble flow(0) /
Batch finish(1)
f23 (f22 10 to 12)
[Type2]
Sub function for
batch weighing
40 41 No function
Initial settings are
11,21,31 and 40.
* 0 Over
1 Under
f24
Relay output
selection
2 Finish / Full (f22 9,10,12)
Effective when
f22 7,9,10 or 12.
f25
Batch finish output time 0.0 to
9.9
Relay on time by 0.1second step
(00 : continuous to zero band)
Initial setting is 0.0.
f26
Zero band
-999999 to 999999 Initial setting is 0.
*: Initial settings.
Hold
Item
Parameter
Description
** 0 Not hold (Hold function is off)
1 Manual hold
2 Auto hold
f27
Hold mode
3 Manual and Auto hold
f28
Averaging time 0.0 to
9.9
Averaging time by 0.1second step
(00 : hold at start time)
Initial setting is 0.0.
*: Initial settings.
6.2. F-Functions