A&D Weighing Indicator AD-4405 User Manual
Page 10

Page
8
AD-4405 Weighing Indicator
4.
4.
4.
4. Description of Panels and symbols
Description of Panels and symbols
Description of Panels and symbols
Description of Panels and symbols
4.1.1.
Front Panel Description
N
o.
Name Description
1
STABLE
Indicates when the display is stable.
2
NET
Indicates when the display is the net weight.
3
ZERO
Indicates when the display weight is in the Zero range.
4 Annunciator
lndicates various weighing status or functional selection.
PT
Indicates when PRESET TARE value is being used.
READY
Indicates the state of comparison or batching.
M+
(Accumulation)
Indicates when there is a result of addition or accumulation.
1,2,3(Triangle)
Depending on the function selected, Indicates various states.
5
MAIN display
Displays the weight, accumulation data or setting parameters.
6
UNIT part
Unit used to weigh.
7 HI/OK/LO
Indicates the results of comparison.
8 Capacity
label Capacity and division (this label is included in the accessories).
9
Key switches
Selects the display, settings or data output.
CODE key
The key to select the code memory.
SAMPLE key
The key to set the unit weight for the counting function.
SETPOINT key
The key to set the comparator value.
PT key
The key to set the PRESET TARE value.
TOTAL key
The key to display the total weight.
M+ key
The key to display the total weight.
START key
The key to start comparison / batch weighing.
STOP key
The key to stop comparison / batch weighing.
FEED key
The key to feed the paper of the optional Built-in Printer.
MODE key
The key to switch unit used to weigh.
0
– 9 key
The key to input any numerical settings.
A
– F key
Used to enter setting values (press NET/GROSS key at a time).
2
1
3
4
5
6
7
8
9
10
4. Description of Panels and symbols