Technical support – PASCO EM-8642A Magnetic Force Accessory User Manual
Page 12

®
M a g n e t ic D e m o n s t r a t io n S y s t e m
T e c h n i c a l S u p p o r t
8
is in the equilibrium position, rotate the magnet about the axis formed by the thread. The aluminum tube will
rotate with the magnet, always staying parallel to the magnetic field lines.
Technical Support
For assistance with any PASCO product, contact PASCO at:
For more information about the Magnetic Demonstration System, the Variable Gap Magnet, the Magnetic Force
Accessory and the latest revision of this Instruction Manual, visit the PASCO web site and enter EM-8644B,
EM-8618, or EM-8642A in the Search window.
Limited Warranty For a description of the product warranty, see the PASCO catalog.
Copyright The PASCO scientific 012-12722A
Magnetic Demonstration System Instruction Manual is copyrighted with all rights
reserved. Permission is granted to non-profit educational institutions for reproduction of any part of this manual, providing the repro-
ductions are used only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Trademarks PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in the United States and/or
in other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to iden-
tify, products or services of, their respective owners. For more information visit www.pasco.com/legal.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax:
(916) 786-7565
Web:
www.pasco.com
Email:
Initial
position
Equilibrium
position
Glass rod
Equilibrium
position
Initial
position
Aluminum tube
Figure: Demo Setup