PASCO PS-2138 Goniometer - Manual (Page 25)

Model No. PS-2138 Goniometer
Safety
Read the instructions before using this
product. Students should be supervised by
their instructors. When using this product,
follow the instructions in this manual and
all local safety guidelines that apply to
you.
Ensure that students are aware of these
safety precautions before using the
Goniometer.
Place the mounting straps on the body
snugly but not too tightly. The straps
should not constrict blood flow or
breathing. Remove all straps at the first
sign of discomfort.
When performing physical activities such
as walking or running, do so only at a
comfortable rate. Some activities call for
students to stand or sit on raised surfaces;
use only surfaces that are safe and
appropriate for these activities.
Specifications
PS-2138 Goniometer Probe used with
PS-2139 Angle Sensor and a PASPORT
interface.
Technical Support
For assistance with any PASCO product,
contact PASCO at:
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: (916) 786-3800
(800) 772-8700
Fax: (916) 786-3292
Web: www.pasco.com
Email: [email protected]
Copyright
The PASCO scientific 012-08904A
Goniometer Instruction Manual is
copyrighted with all rights reserved.
Permission is granted to non-profit
educational institutions for reproduction of
any part of this manual, providing the
reproductions are used only for their
laboratories and are not sold for profit.
Reproduction under any other
circumstances, without the written consent
of PASCO scientific, is prohibited.
Limited Warranty
For a description of the product
warranty, see the PASCO catalog.
Range -170°–170°
Accuracy ±1° calibrated
±3° uncalibrated
Resolution 0.04°
Sampling rate 20 Hz default
100 Hz maximum
Probe arm length 21 cm
Mounting straps Large: 15 × 120 cm
Small: 10 × 18 cm
Author: Alec Ogston
The PASCO Goniometer was developed in
cooperation with Dr. Nancy Beverly, Mercy College,
Dobbs Ferry NY.