Pach and Company Quantum QC Series Manual - Manual (Page 30)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
1. Log-in to programming
2.
Enter 36 then #
3. Enter 0= delete 1= add then press #
4. Enter code 01-10 then press #
5. Enter 4-8 digit code, see digit setting on function code 09
see Chapter 3 for keypad layout
6. Present the card or fob in front of the black window, the system will register the card or fob 8-digit number printed
then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 ( 24 hours ) - 20 see function code 17 then press #
10. Enter Sat ID 0-7 then press # ( enter 0 if no satellite connected to the QR5 )