Pach and Company Quantum QC Series Manual - Manual (Page 16)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
1. Log-in to programming
2. Enter 07 then #
3.
Enter
1 to clear all access code then press #
or
* to cancel
Function Code 09 - Access Code Digit
1. Log-in to programming
2.
Enter 09 then #|
3. Enter 4, 5, 6, 7 or 8 (default setting is 4 digit) then press #
Function Code 10 - Add New Card or Transmitter
A maximum of 100 cards or transmitters can be programmed into the Quantum QC SERIES
1. Log-in to programming
2.
Enter 10 then #
3.
Present the card in front of the card reader black window, the number will register automatically (or enter the last 8
digits of the number on the card) then press #or press the transmitter button (the number will automatically register)
then press #