Function code 33: temporary code – Pach and Company Quantum QC Series Manual User Manual

Page 26

Text mode
Original mode

Table of Contents

file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]

3. Enter 01-99 (second) then press #

Function Code 33 Temporary Code

The code will be expired after being used a certain amount of times specified (1-10 times) in the programming, Up to 10
temporary codes can be programmed.

Log-in to programming

2. Enter 33 then #

3. Enter 0= delete existing temporary code or 1= add temporary code then press #

4. Enter code number 01-10 then press #

Enter 4-8 digit code, see digit setting on

function code 09

see

Chapter 3

for keypad layout

6. Enter name then press #

7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #

8. Enter time zone set 1-3 then press #