Pach and Company Quantum QC Series Manual - Manual (Page 28)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
see Chapter 3 for keypad layout
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 ( 24 hours ) - 20 see function code 17 then press #
10. Enter Sat ID 0-7 then press # ( enter 0 if no satellite connected to the QR5 )
11. Enter
0= no more additional time zone then press # and return to step 3 to program another temporary code
1= add additional time zone then press # and return to step 8
* = exit programming
Function Code 35 Temporary Card
The card will be expired after being used a certain amount of times specified (1-10 times) in the programming, Up to 10
temporary cards can be programmed
.
1. Log-in to programming
2. Enter 35 then #
3. Enter 0= delete 1= add then press #