Pach and Company Quantum QC Series Manual - Manual (Page 25)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
1. Log-in to programming
2. Enter 26 then #
3. Enter 0= off, 1= On (default) then press #
Function Code 27 Talk Time
The amount of time the visitor can talk to the tenant. The timer starts as soon as the system is offhook.
1. Log-in to programming
2. Enter 27 then #
3. Enter 10-240 seconds then press #
Function Code 28 Unlock Relay 1 Time
The amount of time for relay 1 to trigger.
1. Log-in to programming
2.
Enter 28 then #
3. Enter 01-99 (second) then press #
Function Code 29 Unlock Relay 2 Time
The amount of time for relay 2 to trigger.
1. Log-in to programming
2.
Enter 29 then #