Pach and Company Quantum QC Series Manual - Manual (Page 15)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
5.
Enter door 1 or 2, or 3 for both, then press #
6.
Enter time zone 1-3 then press #
7.
Enter 00 ( 24 hours ) - 20 see function code 17 then press #
8. Enter satellite system ID 0-7 ( enter 0 if no satellite connected to the QR5 ) then press #
9.
Enter
0= no more additional time zone then press # and return to
step 3 to program another access code
1= add additional time zone then press # and return to step 6
* = exit programming
Function Code 07 - Delete Access Code
1. Log-in to programming
2.
Enter 07 then #
3.
Enter code to be deleted then press #
if access code exists
if access code does not exist
Repeat this step to delete another code
Function Code 08 - Clear All Access Cod
es