Pach and Company Quantum QC Series Manual - Manual (Page 29)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
4. Enter card 01-10 then press #
5. Present the card or fob in front of the black window, the system will register the card or fob 8-digit number printed
then press #
see Chapter 3 for keypad layout
6. Enter name and press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 ( 24 hours ) - 20 see function code 17 then press #
10. Enter Sat ID 0-7 then press # ( enter 0 if no satellite connected to the QR5 )
11. Enter
0= no more additional time zone then press # and return to step 3 to program another temporary code
1= add additional time zone then press # and return to step 8
* = exit programming
Function code 36 Special Card
The card can be use to unlock hold (open hold) and use same code again to lock (close) door or gate. Up to 10 special
cards can be programmed.