Control company – Control Company 5000 THREE-CHANNEL TIMER User Manual

Page 2

TIMING OPTIONS
1.

One channel counts up, two channels count down.

Two channels count up, one channel counts down.

All three channels count down.

All three channels count up.

TIMEOUT
Any channel may be stopped during any running time. Press corresponding CHANNEL
1, 2, or 3 button to stop timing for selected channel. Resume timing by pressing
selected CHANNEL 1, 2, or 3 button. Any number of time-outs may be taken during
any timing event.

ALL OPERATIONAL DIFFICULTIES
If this timer does not function properly for any reason, please replace battery with a
fresh, high-quality battery (see Battery Replacement section). Low battery power can
occasionally cause any number of “apparent” operational difficulties. Replacing battery
with a fresh battery will solve most difficulties.

BATTERY REPLACEMENT
An incorrect display, no display or operational difficulties indicate that battery should
be replaced. To open BATTERY COMPARTMENT, slide BATTERY COMPARTMENT
DOOR on back of unit in direction of arrow. Remove depleted battery. Insert one fresh
AAA alkaline battery in appropriate position to agree with polarity symbols (+ and -) in
compartment. Replace BATTERY COMPARTMENT DOOR. Equivalent battery
replacements are any AAA alkaline batteries. Replacement battery Cat. No. 1105.

Warranty, Service, or Recalibration
For warranty, service, or recalibration, contact:

CONTROL COMPANY

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281-482-1714 Fax 281-482-9448

E-mail [email protected]

www.control3.com

Control Company is ISO 9001 Quality-Certified by DNV and ISO 17025 accredited as a

Calibration Laboratory by A2LA.

Rev. 2 092507

Control Company Cat. No. 5000
Traceable

is a registered trademark of Control Company