Control Company 5004 4-CHANNEL BIG DIGIT TIMER - Manual

CONTROL COMPANY
4455 Rex Road
Friendswood, TX 77546 USA
Ph. 281 482-1714
Fax 281 482-9448
E-mail [email protected]
www.control3.com
Control Company is
ISO 9001 Quality-Certified by DNV
and ISO 17025 accredited as a
Calibration Laboratory by A2LA.
Cat. No. 5004
Traceable ® 4-Channel Big Digit Timer
Instructions
92-5004-00
Rev. 2 090804
Traceable® is a registered trademark
of Control Company.
© 2004 Control Company
TRACEABLE ® 4-CHANNEL BIG DIGIT TIMER INSTRUCTIONS
SPECIFICATIONS
Display:
¾”-high digits show hours,
minutes, seconds (sec ½”-high)
Accuracy: 0.01%
Timing
Channels: Four independent channels
Timing
1 second to 99 hours, 59 minutes,
Capacity: 59 seconds
Alarm:
Audible and visual (distinct audible
alarm for each channel)
Memory: Automatic recall of last programmed
time (all four channels)
Functions: Countdown timing and count-up
(stopwatch) timing
Clock: Time-of-day with PM indicator and
12 or 24 hour format
Size/Weight: 2.75” x 2.5” x .5” / 2 oz.
Attachments: Clip, magnetic back, and stand
OPERATION
Time-of-Day Clock Setting
1. Press and hold CLOCK button for 3 seconds.
Time-of-day slowly flashes on the display.
2. Press H (hours), M (minutes), or S (seconds)
button to advance time-of-day. Press and
hold H or M button to rapidly advance
display. S button will reset second digits to
zero when in 0 to 30 seconds range, in the 31
to 59 seconds range it will reset seconds to
zero and advance minutes by one.
NOTE: PM time indicated by "P" on LCD.
3. Once desired time-of-day is on display, press
CLOCK button to confirm your entry.
4. To set 12 or 24-hour format, make sure clock
is displayed. Press and hold START/STOP
button for 3 seconds to toggle between 12
and 24 hour formats.
Countdown Alarm Timing
1. Press T1, T2, T3, or T4 button. Display shows
T1, T2, T3 or T4 in right corner. If channel is
running, press START/STOP button and then
press C button. Display should read 0:00 00.
2. Press H (hours) button to advance hour
digits. Each press is confirmed with a sound.
Press and hold H button to rapidly advance
hours.
Press M (minutes) button to advance minutes
digits. Each press is confirmed with a sound.
Press and hold down M button to rapidly
advance minutes.
Press S (seconds) button to advance
seconds digits. Each press is confirmed with
a sound. Press and hold down S button to
rapidly advance seconds.
3. Once desired time is on display, press
START/STOP button to begin timing down.
All four timing channels can be running simulta-
neously, simply follow steps 1 through 3 to set
countdown times for each channel.
When a channel is timing but not being dis-
played, corresponding channel indicator (T1,
T2, T3, or T4) flashes on display.
4. When the timing channel reaches 0:00 00, an
alarm will sound for 60 seconds and channel
will begin counting up until turned off.
When a timing channel reaches 0:00 00 but is
not being displayed, alarm for that channel will
sound for 60 seconds. The corresponding
channel indicator (T1, T2, T3 or T4) will begin to
flash slower and channel will begin counting up.
When multiple channels are alarming, alarm for
most recent channel to reach 0:00 00 will sound.
EXAMPLE:
If T1 is alarming (1 beep) and T2 reaches 0:00
00, you will hear alarm for T2 (2 beeps).
The alarm will sound for 60 seconds and then
turn off automatically. To turn alarm off manually,
press any button.
When multiple channels are alarming, press any
button to turn off alarm and stop count up timing
for channel being displayed, other channels will
continue counting up. To stop count-up timing
for other channels, press corresponding
channel button (T1, T2, T3, or T4) and then
press START/STOP button. To clear display,
press C button.
NOTE: Press C button to clear display to
0:00 00 and also clear last programmed time
for that channel. See “Memory Recall”
section for recalling last programmed time.
Timer is stopped by pressing START/STOP
button and restarted by pressing START/
STOP button (see Timeout Function).
Correcting an Entry
If an error is made during an entry, press C
button to clear display to zero. To clear an entry
when time is running, first stop timing by
pressing START/STOP button, then press C
button. A timing channel will only clear when
time is stopped.
Memory Recall
When timing repetitive intervals, memory
function will recall last programmed time for
each channel. This feature allows timer to be
dedicated to frequently timed tests. Timer will
return to desired time period again and again.
1. Follow steps 1 through 4 in “Countdown
Alarm Timing” section.
2. Once count up timing has been stopped for
corresponding channel (T1, T2, T3, or T4),
press START/STOP button to recall original
programmed time.
3. Press START/STOP button to begin counting
down. You may repeat this process as often
as needed for each channel.
NOTE: If C button is pressed when time is
stopped, it clears display and memory
for channel being displayed.
Stopwatch (Count-Up) Timing
1. Press T1, T2, T3, or T4 button. The display
will show T1, T2, T3 or T4 in right corner. If
timer is running, press START/STOP button
and then press C button. Display should
read 0:00 00.
2. Press START/STOP button to begin count-up
timing.
All four timing channels can run simultaneously,
simply follow steps 1 through 2 to begin count-
up timing for other channels.
When a channel is timing but is not displayed,
corresponding channel indicator (T1, T2, T3, or
T4) will flash on display.
Timer may be stopped by pressing START/
STOP button and restarted by pressing START/
STOP button (See Timeout Function).
3. When timing has completed for a channel
(T1, T2, T3, or T4) and timing has stopped,
press C button to clear display to 0:00 00.
Timeout
Any channel may be stopped during any
running time. Press corresponding channel
button (T1, T2, T3, or T4) to display channel,
then press START/STOP button. Timing may be
resumed by pressing START/STOP button.
ALL OPERATIONAL DIFFICULTIES
If this timer does not function properly for any
reason, please replace battery with a new high
quality battery (see “Battery Replacement”
section). Low battery power can occasionally
cause any number of “apparent” operational
difficulties. Replacing battery with a new fresh
battery will solve most difficulties.
BATTERY REPLACEMENT
An incorrect display, no display or operational
difficulties indicate the battery should be
replaced. Use a coin to open battery cover on
back of timer (turn cover approximately 1/8 turn
counter-clockwise). Equivalent battery replace-
ments are: RAYOVAC RW42, DURACELL D357,
and EVEREADY 357. Insert battery with positive
side facing you. Replace battery cover.
Replacement battery Cat. No. 1039.
WARRANTY, SERVICE, OR RECALIBRATION
For warranty, service, or recalibration, contact: