Nova-Tech pH 310 - Manual (Page 15)

From measurement mode: 1.
Press the Set up key
to enter Set Up
mode.
See figur
e
2.
Press the
▲
and
▼
keys
to scr
oll thr
ough
subgr
oups until you view parameter
P2.0.
3.
pH 300 meter only:
Press the ENTER
key
repeatedly
to view pr
evious calibration
data.
See figur
e
pH 310 meter only:
Press the ENTER
key
repeatedly
to view pr
evious calibration
data. The meter will first display the calibration point, and then display the date and time of calibration.
See figur
es and
4.
When you have scr
olled thr
ough all
calibration data, you will automatically return to the subgr
oup menu. Pr
ess the
CAL/MEAS key to r
eturn to measur
e-
ment mode.
Notes If ther
e is no pr
evious calibration data at a
particular point, the primary display will show “----”.
29
28
P1.0: Memor
y Clear
Use this parameter to clear all memory values when you need to stor
e a new series of
values. This lets you avoid confusing the old values with the new ones. N
O
is
th
e
default setting. NOTE: Selecting
YES will wipe out all memory
.
8.2
SETUP
MEM
A
A
SETUP
MEM
B
B
From measurement mode: 1.
Press the Set up key
to enter Set Up
mode.
2.
Press the
▲
and
▼
keys
to scr
oll thr
ough
subgr
oups until you view parameter P1.0.
See figur
e
3.
Press the ENTER
key
to enter parameter
P1.0.
4.
Press the
▲
and
▼
keys
to toggle
between NO
and
YES.
• NO r
etains curr
ent memory
•
YES
clears all memory
See figur
e
5.
Press the ENTER key
to confirm selec-
tion and r
eturn to the subgr
oup menu.
Pr
ess the CAL/MEAS key to r
eturn to
measur
ement mode.
P2.0: V
iewing previous calibration data
This mode lets you r
ecall pr
evious calibration data, which helps you know when to
recalibrate your meter
. This is a “view only” mode.
8.3
pH
SETUP
A
A
pH
SETUP
B
AM
SETUP
C
B
C
B
Time/date appears on pH 310 meter display only
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(86
6) 433-6682